I believe you are asking if the Go Power Overlander Expansion Kit - 200 Watt Solar Panel # 34282182 will work with the Go Power PWM Solar Charge Controller # GP72RR, which is a 30 amp controller, and the answer to that is yes it will. It comes with everything needed to add the panel to your system.
Overall, this is compatible with a number of Go Power solar charging systems:
- Go Power Solar Elite Charging System - 380 Watt Solar Panels - 2,000 Watt Inverter Charger # 34282184
- Go Power... view full answer...
I looked up the Bluetti PV200 Watt Solar Panel and show it draws up to 9.7 amps at max current. Therefore, a 10 amp charge controller like the Go Power PWM Solar Charge Controller with USB Port part # 34280503 will work and is what I recommend. It has multiple charging modes for different battery types, and easy to read LCD display, and a USB port for quick charging of smaller accessories. view full answer...
I contacted the manufacturer regarding your questions. They informed me that the MPPT 40A solar controller does only have the setting for AGM and no lithium setting. This setting is only for the solar controller and will still charge the battery, it just may not fully charge the batteries. It has no affect on the alternator charge.
You can use the Go Power MPPT Solar Charge Controller # GP54FR if you want to be able to maximize your current lithium battery bank. You can also add the Bluetooth... view full answer...
The Go Power Eco Solar Charging System with Digital Solar Controller part # 34273837 comes with a charge controller rated at 10 amps or 170 watts. The included solar panel only provides 1.14 amps or 20 watts so that means you will have 8.86 amps remaining which is plenty for a 100 watt panel. That said, we don't offer the panels separately so your best option is to obtain the Go Power Solar Flex Charging System with Digital Solar Controller part # 34272630 and add your 20 watt panel to... view full answer...
The Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - 10 Amp - 12V # 34280503 has the following dimensions pictured below. Based on the dimensions you stated you most likely have the Go Power PWM Solar Charge Controller with Bluetooth - LCD Digital Display - Dual Bank - 30 Amp - 12V # 34276119.
When it comes to solar charge controllers dimensions do not matter. What is most important is what amperage rating the controller has. To determine the correct rated solar... view full answer...
You can use the Go Power Portable Solar Panel with Digital Solar Controller, # 34282730 and fixed panels, such as the Go Power Solar Elite Charging System, # 34282184 simultaneously. The Go Power Solar Elite Charging System, # 34282184 comes with a 30-Amp PWM solar controller that will probably handle the combined. However, the portable unit can still be maintained with its current solar controller, it does not require to be dependent on the same controller as the the Go Power Solar Elite... view full answer...
The charge controller in your solar installation sits between the energy source (solar panels) and storage (batteries). Charge controllers, like the Go Power MPPT Solar Charge Controller - LCD Digital Display - 60 Amp
# GP54FR prevent your batteries from being overcharged by limiting the amount and rate of charge to your batteries.
They also prevent battery drainage by shutting down the system if stored power falls below 50 percent capacity and charge the batteries at the correct voltage... view full answer...
Yes, once you start getting into the 150w to 200w or higher range MPPT solar charge controllers are up to 30% more efficient than a PWM controller. Anything under 150w you're fine to just save your money and stick with a PWM controller as you'll see no added benefits from an MPPT.
Since the Go Power Weekender ISW RV Solar Charging System # 34282183 you referenced is 190w you'll see an increased efficiency in the system when used with the Go Power MPPT Solar Charge Controller # GP54FR.... view full answer...
The Go Power MPPT Solar Charge Controller - LCD Digital Display - 60 Amp # GP54FR works with lithium, sealed, gel, and flooded batteries. This solar charge controller protects battery from harmful overcharging and uses automatic multistage charging to extend battery life. There is an optional Bluetooth Dongle for Go Power MPPT Solar Charge Controller # GP94FR that will allow you to monitor solar controller settings and data from your smartphone or tablet using the Go Power Connect app. view full answer...
The Go Power Solar Elite Charging System part # 34282184 comes with the Go Power PWM Solar Charge Controller with Bluetooth part 34276119. The Go Power PWM Solar Charge Controller can charge both flooded and lithium batteries and there are separate banks for each of these battery types so you can choose one battery charge type for each battery. That said, the controller does not charge both batteries simultaneously, it charges the battery in bank 1 first and then the battery in bank 2. view full answer...
I checked the owner's manual for the Furrion MPPT Solar Charge Controller part # FSCC60PWBBL and it does state that you must hook the controller up to the battery first before hooking up the solar panels therefore yes, you need to unhook the solar panels when switching batteries. view full answer...
The wiring diagram for the Go Power PWM Solar Charge Controller # 34280503 can be found in the manufacturer's user manual and I attached a copy of it below.
To install the controller, first pick an appropriate location and mount the controller using the included hardware. This should be as close to the battery as possible, on a vertical surface, and indoors to protect the unit from weather damage.
Next, run wires from the positive and negative battery terminals to the controller according... view full answer...
Your solar panels do not connect directly to the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger, # PD4060K. You will want to connect your solar panel system to the battery bank using a charge controller such as the Go Power PWM Solar Charge Controller with USB Port, # 34280503. or the Furrion MPPT Solar Charge Controller - 50 Amp - 12V/24V, # FSCC60PWBBL depending on the type and size of your battery bank. I have attached a few help articles on solar panels.... view full answer...
At night or when no solar power is reaching the OptiMate Solar Duo Solar Charging System with Controller # MA79JR the controller switches to Monitoring mode and only draws 0.5milliamps of power. As soon as it senses charge coming from the panel it will automatically switch to Charge mode to charge and maintain the on board battery. view full answer...
Good question, so I reached out to Goal Zero, and they said that you would need a solar controller along with the adapter to connect the Solar on the Side with your Goal Zero Nomad 100 Solar Panel # 287-13007:
- Spade to SAE Cable for Goal Zero 10 Amp and 20 Amp Solar Charge Controllers # GZ27MR
- Goal Zero PWM Solar Charge Controller with 8mm Solar Connector - LCD Display - 10 Amp # GZ43FR view full answer...
Yes, the Goal Zero Boulder 100 Briefcase Solar Panel - 100 Watts, part # 287-32408, will work with your motorhome with the addition of the Goal Zero 10 Amp Solar Charge Controller with Battery Terminal Connections for Boulder Solar Panels, part # GZ79YR. Your solar panel will not hook directly to your batteries. It will connect to the charge controller. Having a multi-meter, part # PT89ZR, handy will make connecting your solar panel and charge controller easier.
I have included product... view full answer...
portable options like the Go Power Portable Solar Panel with Digital Solar Controller # 34282610 have their own solar charge controller and would be have to be ran directly to the battery. If you have a port on the trailer to plug into you'd want to verify that it only runs to the battery and doesn't connect to the charge controller inside of the trailer. If it ran to the charge controller in the trailer then you'd most likely receive an error code and the system would cut off power to... view full answer...
The Go Power Weekender ISW RV Solar Charging System at 190 Watt Solar Panel with 1,500 Watt Inverter, # 34282183, is a great product. This solar charging system is perfect for boondocking, the 190-watt solar panel provides DC power to charge your RV's batteries, and the 1,500-watt inverter provides AC power to run appliances and electronics. If you have a battery bank that already has a charging system from the alternator, no worries. The charge controller that comes with this system... view full answer...
The charge controller that comes with the Go Power Weekender ISW Solar Charging System part # 34282183 is the Go Power PWM Digital Solar Controller which as the title states uses PWM technology. view full answer...
Systems with a 30 amp solar charge controller or lower are run parallel while systems with a higher amp solar charge controller can be run in series or series parallel. The Go Power Solar Extreme Charging System - 570 Watt Solar Panels - 3,000 Watt Inverter Charger Item # 34282185 you linked to has a 30 amp solar charge controller so it will be3 wired in parallel. view full answer...
Go To Results